ADS Environmental Services Portable FlowShark Pulse QR 775006 A2 - Manual (Page 132)

Parameter Settings 6-33
The analog output on the Portable FlowShark Pulse is a 0 – 10 voltage output.
Designate the functions for the analog output through this menu.
Name
(optional – for internal use only) To enter the name, follow the same procedure used
for PAR > Measurement Place > Name.
Function
Assign one of the following functions to the analog output:

Inactive No signals from analog output

Flowrate Output Outputs an analog signal proportional to the calculated
flow volume
 Level Output Outputs an analog signal proportional to the calculated depth
level
 Velocity Output Outputs an analog signal proportional to the average flow
velocity calculated based on the individual velocity readings
 Temperature Water Outputs an analog signal that represents the water
temperature reading

Analog input 1, Socket 3 Outputs the value from analog input 1, which
may have been modified based on a specific parameter
Selecting analog output functions
Measurement Span (Range)
Define the specific values for the output signal. Enter the values based on the units
selected through the Extra menu. Negative values may be included.
Measurement span