ADS Environmental Services Portable FlowShark Pulse QR 775006 A2 - Manual (Page 152)

Parameter Settings 6-53
I/O: Memory Card
This menu enables you to view information on the memory card.
Memory card options
Card info menu
This information is accessible only when the memory card is installed in the unit. To
view the remaining storage capacity (based on time) on the card, it must be installed
in the unit for at least one hour.
You can execute the process of formatting the card through the Memory Card menu.
Formatting the card
Only use memory cards purchased through ADS. Other
manufacturer’s cards may lead to irreversible loss of data,
measurement failure, or permanent transmitter reset.
Never format a memory card on a PC; always use the Portable
FlowShark Pulse. The unit can neither use nor accept cards that
have been formatted on a PC.
Formatting the card will erase all the data saved on the card.
Replace the memory card at any time by pressing the ALT key. Pressing this key
transmits all the data from the internal memory to the memory card and displays the
message Memory card busy.
Do not attempt to replace the card while the unit is displaying the
Memory card busy message.
The Portable FlowShark Pulse allows you to view parameter settings stored in the
unit and to save settings to the unit.