ADS Environmental Services Portable FlowShark Pulse QR 775006 A2 - Manual (Page 140)

Parameter Settings 6-41
 Periodic This option provides cyclical storage of flow data and peripheral
input signals.
 Delta Event The Portable FlowShark Pulse can toggle between two logging
options:
 Switchover Operation This involves initiating the recording of
readings immediately after a depth threshold is exceeded or a specific
impulse from the digital input is received.
 Continuous operation This involves continuously recording readings
similar to using a permanent flow meter. The unit will save data based on a
designated storage interval. This mode is intended for use in conditions
involving very high discharge and for short-term operations.
Selecting memory options
Source

Level This setting configures the pressure measurement cell to measure and
retrieve depth data every 5 seconds. If the depth threshold is exceeded, the
Portable FlowShark Pulse will immediately switch over to event mode.

Digital I1 The Portable FlowShark Pulse permanently monitors the digital
input and immediately switches over to event mode when the digital input is
enabled.
Storage mode screen