ADS Environmental Services Portable FlowShark Pulse QR 775006 A2 - Manual (Page 96)

Initial Startup 5-5
Operation Basics
The Portable FlowShark Pulse has a user-friendly interface and is completely menu
driven. Use the control keys to navigate through the menus (refer to Chapter 6,
Parameter Settings).
Use these buttons to move among the main menus.
Use these buttons to scroll within the main menus.
Use this button to enter a submenu (or the input field)
selected using the right/left arrow keys. This button also
exists for confirming data entries.
Use this button to exit submenus or cancel data entered.
Pressing ESC in the main screen for approximately 1 second
will bring up a confirmation to turn the unit off. Choosing
Yes will shut down the unit after 5 seconds, discontinuing
measurements and data storage.
The unit will restart 7 seconds after pressing any key.
- Use these buttons to set parameters and to enter numbers and
text (such as the name of a measurement location or relay
output description). Entering text on the Portable FlowShark
Pulse is similar to entering text using a telephone keypad or
cell phone buttons. Pressing a button multiple times quickly
moves the cursor to the next letter in the series. The cursor
will jump to the next digit automatically if a button is not
pressed within approximately 2 seconds.
Use this button for entering digits and, when in RUN-Mode,
recalling identification information for the device, such as
the software version and electronic components in use. It
also functions to initiate communication between the
transmitter and sensors.
Use this button to alternate between uppercase and lowercase
letters in text entry mode. When setting parameters, this
button can be used to enable or disable various functions and
to toggle between various programming options. When used
in the RUN mode, it initiates a data download to the compact
memory card.