ADS Environmental Services Portable FlowShark Pulse QR 775006 A2 - Manual (Page 151)

6-52 ADS Portable FlowShark Pulse Manual
Echo profile for depth measurement
The graphic displayed above enables service personnel to assess the echo signal
within the acoustical range of measurement. Ideally, the initial peak (representing
echoes from flow/air interface) will be very narrow, steep, and high. The remaining
peaks (representing double and multiple reflections caused by the signal echoing back
and forth between the flow/air and flow/pipe interfaces) will be lower and wider.
T-Sensor
This screen allows you to view water and air temperature readings. Air temperature is
available only when using an air-ultrasonic depth sensor with the Portable FlowShark
Pulse. Invalid measurements may indicate cable breaks, short circuits, or improperly
terminated connections.
Temperature screen
I/O: Interfaces
(ADS currently does not support wireless communication with the Portable
FlowShark Pulse) This menu provides the signal quality and battery voltage for the
GSM module and, therefore, displays only when GPRS communication is in use.
Signal quality for the GSM module