ADS Environmental Services Portable FlowShark Pulse QR 775006 A2 - Manual (Page 144)

Parameter Settings 6-45
name of measurement place.TXT
This is the file in which all of the flow data readings are stored. It is saved under the
name of the measurement location.
NIVIDENT.TXT
The name of this text (.txt) file reflects the name of the measurement location.
If the location name saved to the memory card is not consistent with the name of the
measurement location saved to the Portable FlowShark Pulse, the unit will prompt
you to format the card. If the card requires formatting, the Portable FlowShark Pulse
will not save any data until formatting is complete.
PARAMET.NIV, PARAMET.TXT
These files are created when parameters are saved to the memory card.
PARAMET.NIV is required for uploading data to the Portable FlowShark Pulse.
PARAMET.TXT is the printable (text) version of PARAMET.NIV. Only parameters
modified previously will be exported.
Use memory cards purchased only through ADS. Other
manufacturer’s cards may lead to irreversible loss of data,
measurement failure, or permanent transmitter reset.
Do not format memory cards on a PC. Format cards only on the
Portable FlowShark Pulse. The unit can neither use nor accept
cards that have been formatted on a PC.
PAR: Independent Readings
The Portable FlowShark Pulse provides two programmable analog inputs. Select port
1 or 3 using the left and right arrow keys.
These independent analog inputs can be used for purposes such as throttle
verification. A 2-wire probe installed within the throttle shaft can be connected to
port 1 or 3.
This depth sensor is not used in calculating flow.