ADS Environmental Services Portable FlowShark Pulse QR 775006 A2 - Manual (Page 88)

4-2 ADS Portable FlowShark Pulse Manual
Rechargeable Battery Pack
The rechargeable lead gel battery pack resides in a padded battery compartment in the
Portable FlowShark Pulse. This compartment is accessible from the inside of the unit
through a cover/lid located to the right of the display that is secured with four screws.
Upon delivery, the battery pack will arrive fully charged. However, ADS does not
ship the unit with the battery pack installed in the battery compartment, so the battery
pack must be installed in the unit prior to operation.
To initially install, charge, or replace the battery pack, unscrew the four screws on the
lid of the battery compartment by hand and remove the cover. When replacing an
existing battery pack, unplug the connection between the unit and the battery pack and
remove the battery pack.
The battery charger must meet the appropriate specifications.
Therefore, use only the ADS power adapter and battery charger to
charge the battery. Using an unauthorized charger could lead to
damage to the battery pack, such as leakage or explosion.
Charge the battery pack only in a dry environment.
Using replacement parts, such as rechargeable battery packs, that
are not supplied or authorized by ADS will invalidate the warranty.
1 Battery charger
2 LED indicator
3 Rechargeable lead gel battery
4 Adapter cable
5 Connection cable
Battery charger with rechargeable battery pack
1
2
3
4
5