ADS Environmental Services Portable FlowShark Pulse QR 775006 A2 - Manual (Page 187)

Specifications A-11
Accessories
Pressure
Compensation
Element
For connection to sensors with integrated pressure measurement
cell
Material: aluminum, plastics
Protection Rating: IP54
Pipe Mounting
System
For temporary, non-permanent clamping installation of wedge
sensors (i.e., water-ultrasonic velocity sensors, water-ultrasonic
combination sensors, and air-ultrasonic sensors) in 8- to 31-inch
(200- to 800-mm) diameter pipes and egg profile pipes up to 24
inches (600 mm) in height
Retractable Fitting For manual removal of 1.5-inch pipe sensors under process
conditions (not suitable for installation or fastening)
Replacement Filter With connector and connection hose for connecting sensors with
integrated pressure measurement cell to Portable FlowShark Pulse
transmitters
Adaptors Metal connection box includes clamps for adapting Portable
FlowShark Pulse sensors (including connector) to other transmitters
or connecting pre-configured sensor cables to other transmitters
Memory Card 128-MB compact flash card
Read-out Adapter Adapter for PCMCIA interfaces, primarily for data read-out via
laptop/notebook computer
Card Reader Includes USB interface for PC connection
Connection Box For connecting more than one input or output to the multi-functional
port simultaneously
Power Supply
Options
12-volt/12-ampere hour rechargeable lead gel battery
Suspension
Bracket with Eyelet
For securing the Portable FlowShark Pulse to manhole rungs or
similar structures
Power Pack/
Battery Charger
Combined battery charger for rechargeable battery pack or for direct
power operation, 100-240 V AC/50-60 Hz; IP 40
Connection Cables Pre-configured for connecting peripheral units to the Portable
FlowShark Pulse