ADS Environmental Services Portable FlowShark Pulse QR 775006 A2 User Manual
Page 65
Advertising
3-28 ADS Portable FlowShark Pulse Manual
1
Stainless steel sheet/cable cover
2
Cable
3
Cable
4
Permanent, elastic material
Suggested cable layout
Do not run the cable loosely, uncovered, or across the medium.
This could lead to a build-up of debris and/or cause the sensor or
the cable to pull apart.
Cable layout (1 represents the protective cover)
Do not bend the standard signal cable in more than a 4-inch (10-
cm) radius. Bending it into a smaller radius could break the cable.
To avoid disturbances caused by electric interference, do not lay
the sensor cable close (or parallel) to motor power supply lines and
power lines.
Advertising