ADS Environmental Services Portable FlowShark Pulse QR 775006 A2 - Manual (Page 141)

6-42 ADS Portable FlowShark Pulse Manual
Periodic interval
This parameter exists for selecting the interval at which to save or record data.
Choose a storage interval from 1 minute to 1 hour. The available intervals include 1,
2, 3, 4, 5, 6, 10, 15, 20, 30, and 60 minutes.
Event Interval
This parameter is available when the event mode is enabled and exists for defining the
interval at which the unit stores data during an event. Designate the storage interval
from 1 minute to 1 hour. The available intervals include 1, 2, 3, 4, 5, 6, 10, 15, 20,
30, and 60 minutes.
Setting the storage cycle
Example of setting the interval at which to save data when an event occurs
Units
Select the units of measure system in which the unit will save the flow, depth, and
velocity data. Choose from the metric (e.g., liters, cubic meters, centimeters per
second), English (e.g., feet, inches, gallons per second), or American.(e.g., feet per
second, million gallons per day) system. After selecting the unit system, the unit will
automatically display the next screen.
You also can define the units of measure in which to save the data to the memory card
for each of the individual categories of measurement (i.e., measured and calculated
flow, velocity, and depth). The units of measure available depend on the unit system
previously selected..