ADS Environmental Services Portable FlowShark Pulse QR 775006 A2 - Manual (Page 108)

Parameter Settings 6-9
Operation Mode (RUN)
This menu displays when the unit is in standard operating mode. The parameters
contained in the following submenus are not essential for parameter setup:
Selecting the standard operating mode
RUN: Standard
This screen displays basic information including the measurement location name and
the current time (alternately displays median temperature), flow rate, average
velocity, flow depth (level), and flow volume.
RUN: Graphic
This screen indicates the velocity distribution in a vertical measurement path.
Pressing the up or down arrow key moves the indicator line in the corresponding
direction. The selected height and current velocity display at the bottom.
The screen enables you to view the current flow conditions at the selected
measurement location. The velocity profile should be distributed evenly without
excessive discontinuity.
Under extremely poor flow conditions, ADS recommends changing the position of
the velocity sensor.