Altera Avalon Verification IP Suite - Manual (Page 219)

Running the Testbench for Two Avalon-MM Masters Slaves
1. Unzip ug_avalon_verification.zip to a working directory.
2. Open <working_dir>/avlm_avls_2x2.qsys .
3. Complete the following steps to generate the testbench:
a. On the Generate menu, select Generate HDL.
b. Specify the parameters shown in the following table:
Table 17-4: Generation Parameters
Value Parameter
Synthesis
Leave this option off Create HDL design files for synthesis
Leave this option off Create timing and resource estimates for third-party
EDA synthesis tools
Leave this option on Create block symbol file (.bsf)
Simulation
VHDL Create simulation model
Leave this option off Allow mixed-language simulation
Output Directory
<working_dir>/avlm_avls_2x2 Path
c. Click Generate.
The Qsys Generate window displays informational messages as it generates the testbench.
d. Close the Generate window.
4. Start the ModelSim simulator.
5. To run the simulation, type the following command in your working directory:
do run_simulation.tcl
This command compiles all the required HDL files, elaborates, and runs the simulation.
Altera Corporation Avalon-MM Verilog HDL and VHDL Testbenches
Send Feedback
17-9 Running the Testbench for Two Avalon-MM Masters Slaves