Altera POS-PHY Level 4 IP Core User Manual

Page 91

Advertising
background image

Chapter 5: Functional Description—Transmitter

5–21

Signals

December 2014

Altera Corporation

POS-PHY Level 4 IP Core User Guide

err_ts_frm

Output

tsclk

Indicates the frame was malformed. Possible causes
are:

Calendar did not begin with a framing word.

Hitless bandwidth repositioning is turned on, and
calendar select word was not ‘b01 or ‘b10.

Unexpected framing word was in the calendar
portion of the frame.

Asserted synchronous to stat_ts_dip2state.

err_ts_dip2

Output

Indicates the calculated DIP-2 did not match the DIP-
2 word in the status frame. Asserted synchronous to
stat_ts_dip2state

.

ctl_ts_callen[7:0]

Input

Sets the expected length of the calendar in the status
frame. This port is absent if Asymmetric Port
Support
is turned on. Only change at reset, or when
ctl_ts_rsfrm

and stat_ts_disabled are both

asserted.

ctl_ts_calm[7:0]

Input

Sets the expected number of status calendar
repetitions between framing and DIP-2 in the status
frame. This port is absent if Asymmetric Port
Support
is turned on. Only change at reset, or when
ctl_ts_rsfrm

and stat_ts_disabled are both

asserted.

stat_ts_calsel

Output

Indicates the currently selected calendar when
Hitless B/W reprovisioning is turned on. Zero
indicates ‘b01, and one indicates ‘b10. It is set to
zero when Hitless B/W reprovisioning is turned off.
This port is absent if Asymmetric Port Support is
turned off.

tav_clk

Input

tav_clk

Avalon-MM clock. Signals prefixed by tav_ are
synchronous to this clock. This port is absent if
Asymmetric Port Support is turned off.

tav_address[3:0]

Input

Avalon-MM address. This port is absent if
Asymmetric Port Support is turned off.

tav_chipselect

Input

Avalon-MM chip select. This port is absent if
Asymmetric Port Support is turned off.

tav_write

Input

tav_clk

Avalon-MM write enable. This port is absent if
Asymmetric Port Support is turned off.

tav_read

Input

Avalon-MM read enable. This port is absent if
Asymmetric Port Support is turned off.

tav_writedata[15:0]

Input

Avalon-MM write data. This port is absent if
Asymmetric Port Support is turned off.

tav_readdata[15:0]

Output

Avalon-MM read data. This port is absent if
Asymmetric Port Support is turned off.

tav_waitrequest

Output

Avalon-MM wait request. This port is absent if
Asymmetric Port Support is turned off.

Table 5–7. SPI-4.2 Status Channel Control and Status (Part 3 of 3)

Signal

Direction

Clock Domain

Description

Advertising