Welltech SIPIVR 6800GS V.2.1 - Manual (Page 11)

10
• Enable System Log: Enable to send system information to syslogD
Server or not
• SyslogD Server IP 1,2: syslogd server IP address
• Mail Server: SMTP server host for email notice
• Mail From: Email sender account
• Mail To: Email receiver (semicolon is used for multiple receiver)
• Subject: Email subject to be send to receiver. The following variable
parameters can be used to create dynamic subject for system notice:
- $LOGLEVEL$: Information Level
- $HOSTNAME$:
Host name
- $HOSTIP$: Host IP address
Step 2:
Click the License button:
Start Path: Configuration > System Config > License
Figure 2.1-2
License Parameter Description:
• Feature: System parameter
• Serial No: System parameter
• License Key: System parameter
• Codec: The supported codec
☺
Note: Please don’t change it unless under Welltech’s instruction.
Step 3: Click the Version button and you can see the system version:
Figure 2.1-3
Step 4:
Click the Job Hook Reset button and you can reset the Job and Hook
service within SIPIVR 6800.
Figure 2.1-4