Welltech SIPIVR 6800GS V.2.1 - Manual (Page 67)

66
The Send Progress component is used to send SIP call progress
indicator to far end.
[Description]
Right-click the Send Progress component, the screen appears as figure
4-19.
Figure 4-19
Progress Type: The type of progress, 180(Alerting) or 183(CPG)
Open Media: Whether to open the RTP or not (18x SDP)
Next Goto: Next component to be executed if the operation is successful
Error Goto: Next component to be executed if an error is occurred
Remark: Description or remark for this components
4.20 Wait For
[Introduction]
Wait for a specified event such as Answer or Bridge Stop.
[Description]
Right-click Wait For component, the screen appears as Figure 4-20.
Figure 4-20
Wait for: The type of the event waited, answer, and bridge stop or transfer
result. The Wait for “Transfer result” is used for call canter application when
you are using call transfer and the ACD server returning queued state. The
SIPIVR will announce the queued order and waiting time and use Wait for
component to wait ACD transfer result. It is only available for 8680 model.
Wait Time: Max time to wait the event
Success Goto: Next component to be executed if the operation is
successful
Timeout Goto: Next component to be executed if the maximum time is
exceeded.
Error Goto: Next component to be executed if an error is occurred
Fail Goto: Next component to be executed if the operation is fail
Remark: Description or remark for this components