Welltech SIPIVR 6800GS V.2.1 - Manual (Page 83)

82
then connected to host
Callback Framed: The user should be disconnected and called back,
then a Framed Protocol should be started for the user
Outbound: The user should be granted access to outgoing devices
Administrative: The user should be granted access to the
administrative interface to the NAS from which privileged commands
can be executed
NAS Prompt: Network access server
Authenticate Only: Only Authentication is requested, and no
authorization information needs to be returned in the Access-Accept
(typically used by proxy servers rather than the NAS itself)
Callback NAS Prompt: The user should be disconnected and called
back, then provided a command prompt on the NAS from which
non-privileged commands can be executed.
GW ID Var: Variable to store gateway ID
Conf ID Var: Variable to store conference ID
Call Type: Protocol type or used on this leg of the call
Telephony
VOIP
Call Origin: The gateway’s behavior in relation to the connection that is
active for this leg
Originate: Call out call leg
Answer: Incoming call leg
Setup Time Var: Variable to store setup time (UTC time format)
Acct Session ID Var: Variable to store Acct Session ID
Next Goto: Next component to be executed
5.21 Accounting Stop
[Introduction]
Send RADIUS accounting stop message to RADIUS server for real time
billing.
[Description]
Right-click Accounting Stop component, the screen appears as Figure
5-21.
Figure 5-21