Welltech SIPIVR 6800GS V.2.1 - Manual (Page 31)

30
Step11: The project is successfully loaded as figure 2.1-42.
Figure 2.1-42
2.1.8 Debug Setup
Debug can be turn on or off based on each system module and level to
minimum the debug information. Please only turn on the debug information
for debug purpose under Welltech FAE's instruction and turn off when
complete. Or the system performance will be greatly hit.
Start Path: Configuration > Debug Setup
Figure 2.1-43
2.1.9 Config Manager
Configuration Management provides a way to save and reload the
system configuration for future use.
Load a Configuration:
Step 1:
When you need to load a saved configuration, click a saved
configuration (i.e. 12/15/2006 50:52 AM Rod20060427) item to load it
back as figure 2.1-44.