Welltech SIPIVR 6800GS V.2.1 - Manual (Page 61)

60
Done Goto: Next component to be executed if "Max Bridge Time" that
defined by Bridge component is reached.
Remark: Description or remark for this component
4.10 On Hook
[Introduction]
On Hook component is used to hang up the call. It’s the last component in
the call flow normally.
[Description]
Right-click the On Hook component, the screen appears as Figure 4-10.
Figure 4-10
ANI: The calling party number**
DNIS: The called party number**
User ID: The user account**
Password: The user password**
Credit Time(sec): The max talk time will be send to 6500**
CTI Data: The stored variable of CTI message that will be sent to
another channel (only available for 8680 model). It can be used for call
center agent to release a call to SIPIVR for doing some checking or
validation and send back CTI information for result. The call center agent
need wait until IVR send the result back.
Remark: Description or remark for this component
** These parameters are optional. It is used to carry RADIUS account
information via SIP header for 6500 in order to do the prepaid service.
Those corresponding SIP headers are: __ANI, __DNIS, __USERID,
__PASSWORD, __CreditTime
4.11 Answer
[Introduction]
Answer incoming call.
[Description]
Right-click the Answer component, the screen appears as figure 4-11.