Welltech SIPIVR 6800GS V.2.1 - Manual (Page 65)

64
First Digit Timeout (msec): The maximum time for waiting the first digit
Inter Digit Timeout (msec): The maximum time for waiting between two
digits
Next Goto: Next component to be executed if the operation is successful
Remark: Description or remark for this component
4.16 Digit Manipulation Builder
[Introduction]
This component is used to make a digit manipulation list. We could use
this list to manipulate an input string that assigned by Execute Digit
Manipulation
component in section 4.17. If manipulated string had same prefix
as Matched Prefix, the system will delete characters from Start Pos to End
Pos, and insert Replaced String to the manipulated string at Start Pos.
[Description]
Right-click the Digit Manipulation Builder component, the screen
appears as figure 4-16.
Figure 4-16
Rule Alias: Used to identify a digit manipulation list
Clear Cascade Rule: Check to clear the digit manipulation list with Rule
Alias
name
Matched Prefix: Set a string to be matched
Replaced String: Set a string to be replaced
Start Pos: Start position to be deleted and insert
End Pos: Stop position to be deleted
Next Goto: Next component to be executed
Remark: Description or remark for this component
4.17 Execute Digit Manipulation
[Introduction]
The Execute Digit Manipulation component is used to manipulate a
string. The rule of manipulation is made by the Digit Manipulation Builder
component that discussed in the section 4.16.
[Description]