Welltech SIPIVR 6800GS V.2.1 - Manual (Page 113)

112
Appendix E System Variable
SIPIVR provides the following built-in system variables (read only) in string
format. User can use it in the call flow.
System Variable
Type Description
__Call_FLOW String Call Flow Name
__CHAN_ID Integer
Channel-ID (min = 0, max =
channel_count -1 )
__ANI String ANI, i.e.: calling number
__DNIS String DNIS, i.e.: called number
__ANITA String ANITA, i.e.: IP address of calling party
__DNISTA String
DNISTA, i.e.: IP address of called
party
__CURR_CID Integer Current component ID
__LAST_CID Integer Previous component ID
__JOB Integer
Job sequence ID (valid only for
received a job request)
__Incoming Type String
Incoming type of “Call”, “Job”,
“Bridge”, “Other”
__Call_Started_Time Double Call start time
__Call_Connected_Time
Double call answer time
__Call_Disconnected_Ti
me
Double
call disconnected time
__Call_Status String call status(100/180/183/200)
__Bridge_Started_Time Double The time to start the bridge
㎝
__Bridge_Connected_Ti
me
Double
Self Bridge outgoing call answer time
__Bridge_Disconnected_
Time
Double
Self Bridge outgoing call disconnected
time
__Bridge_Status
String
Bridge status(0 - Non Bridge, 1 –
Bridged, 2 - Bridge Stop)
__CTI_Info String CTI Info brought by incoming call
__Diversion_From String call diverted user (call forwarder)
__Diversion_Reason String Call diverted reason
__Transfer_Queue_Wait_
Order
String
ACD queued order
__Transfer_Queue_Wait_
Time
String
ACD estimated waiting time