Welltech SIPIVR 6800GS V.2.1 - Manual (Page 77)

76
5.13 INI Operation
[Introduction]
The INI Operation component provides a function manipulating the INI file.
[Description]
Right-click the INI Operation component, and there are two modes —
Setting
or Getting for discussion as follows.
Case 1) The Operation Type is “Setting”, Figure 5.13-1 shows that.
Figure 5.13-1
Operation Type: “Setting”
Add or update an existing key and value in an INI file. If the target INI file
doesn’t exist, system will create the named INI file before manipulating it.
File Name: INI file name to be created or opened
Section: INI section name
Key: INI parameter Key
Value: INI parameter value
Next Goto: Next component to be executed if the operation successful
Error Goto: Next component to be executed if an error is occurred
Remark: Description or remark for this component
Case 2) The Operation Type is “Getting”, Figure 5.13-2 shows that.
Figure 5.13-2
Operation Type:
Getting
Get key value from INI file
Add Value if Get Failed: Create the new key or session when failed to
read the assigned key. The initial value will be the value of output