Welltech SIPIVR 6800GS V.2.1 - Manual (Page 17)

16
re-invite out.
- 0.0.0.0: SDP Media Attribute will be set 0.0.0.0 when send re-invite out.
2.1.4 Radius Setting
Start Path: Configuration>Radius Setting
Step 1:
Click Modify button to setup the Radius Setting as figure 2.1-11.
Figure 2.1-11
Parameter Description:
• Authorization IP: RADIUS Authentication/Authorization server IP address
• Authorization Port: RADIUS Authentication/Authorization server Port
• Accounting IP: RADIUS Account server IP address.
• Accounting Port: RADIUS Account server Port.
• Recharge IP: RADIUS recharge server IP address (Welltech 6600 is
required for recharging service)
• Recharge Port : RADIUS recharge server port.
• Backup Authorization IP: Backup RADIUS Authentication/Authorization
server IP address.
• Backup Authorization Port: Backup RADIUS Authentication/Authorization
server Port.
• Backup Accounting IP: Backup RADIUS Account server IP address.
• Backup Accounting Port: Backup RADIUS Account server Port.
• Backup Recharge IP: RADIUS Recharge server IP address.
• Backup Recharge Port : RADIUS Recharge server port.
• Max Retry: The maximum retry times.
• Response Timeout (msec): The maximum wait for response time from
RADIUS server.
• Recharge Local Port: The RADIUS client local port for recharge service
(Welltech 6600 is required for recharge).
• Local Port : The RADIUS client local port for Authentication, Authorization
and Accounting (default is 1812)
• Secret Key: The shared secret key with RADIUS server.
• CISCO Mode: Send redundant RADIUS attribute as CISCO mode or not.
• CDR Mode: Enable write the CDR or not
• CDR Keepdays: CDR system keeping days
• Switch Threshold: Switch to alternate RADIUS server when failures are
occurred more than switch threshold.