ARAG Bravo 400S Crop sprayer - Manual (Page 32)

32
TANK LEVEL SOURCE: LEVEL SENSOR
Fig. 97
• Reserve level
Indicate range value.
The tank alarm is triggered when, during spraying, the tank level falls below the set value.
For the procedure to be followed when an alarm occurs, please refer to par. 16.1 Error messages.
Fig. 98
• Tank profile
The tank profiles can be uploaded or saved in the internal memory in order to reconfigure the computer, if
necessary, solve problems or configure another tank without having to repeat each operation manually.
In this menu indicate which is the tank profile in use.
The profiles are available ONLY if copied in the internal memory (par. 13.4.2), or after calibrating the
tank profile (par. 10.1.12).
After uploading a tank profile the zero calibration of the level sensor must be carried out
(
Tank level zero value , par. 10.1.12).
ADVANCED SETUP "IMPLEMENT"
Par.
7.4
Exits the function
or data change Confirm access
or data change
Scroll
(LEFT /
RIGHT) Delete
selected
character Increase /
Decrease
of data Scroll
(UP /
DOWN) Enter
selected
character
CONTINUES