8 camera, 9 tractor geometry settings, Tractor upper view – ARAG Bravo 400S Crop sprayer User Manual
Page 48: 8 camera 10.2.9 tractor geometry settings, Advanced setup "tractor, Connection point
48
ADVANCED SETUP
"TRACTOR"
10.2.8 Camera
Fig. 170
It is possible to connect up to 2 cameras to Bravo 400S in order to monitor the working areas that the
operator is unable to see (e.g., when driving in reverse).
From the menu it is possible to enable/disable each single camera individually or both cameras:
No camera connected
1 camera connected to input no.1
1 camera connected to input no.2
2 cameras connected
10.2.9 Tractor geometry settings
Fig. 171
Enter farming machine measures:
- Press the arrow keys (UP, DOWN, LEFT, RIGHT) to move across different tractor views.
- Confirm by pressing
OK
to enter setup.
Fig. 172
Fig. 173
• Tractor upper view
- Press the arrow keys (UP, DOWN, LEFT, RIGHT)
to move across values: the description of the
selected value will appear on the display.
- Confirm by pressing
OK
to enter setup.
- Enter the value.
- Select and enter, one by one, all values.
Connection point
Fig. 174
THE CONNECTION POINT OF A
SELF-PROPELLED MACHINE
COINCIDES WITH THE REAR AXLE OF THE
VEHICLE.
Par.
Exits the function
or data change
Confirm access
or data change
Scroll
(LEFT /
RIGHT)
Delete
selected
character
Increase /
Decrease
of data
Scroll
(UP /
DOWN)
Enter
selected
character