ARAG Bravo 400S Crop sprayer - Manual (Page 70)

70
13.4.1 Internal memory
Allows to transfer the saved data (Fig. 237) from the internal memory of Bravo 400S onto an "external" support (SD card or USB pendrive).
The following paragraphs will use
Implements as an example: the same procedure will be valid for all other cases ( Tractors, Users, etc., Fig. 237).

1
1 Press F4 to enter Memories management .
2 Select the Internal memory menu and press OK .
3 Select Implements (Fig. 237) and press OK .
4 In the list of memorized names select the desired implement (Fig. 238) and press OK .
A list of actions that can be performed for the selected implement will appear ( Delete etc., Fig. 238). These will be described below.
The option [Select all... ] allows performing the same action on ALL implements of the list at the same time.

2
Fig. 236

3
Fig. 237
A
USB Pendrive 1 inserted = active action
B
USB Pendrive 2 not inserted = locked action
A

4
B
Fig. 238
• Delete

Fig. 239

Fig. 240
Allows to delete data from Bravo 400S internal
memory.
- Select Delete (Fig. 239) and press OK .
- The message in Fig. 240 is displayed: confirm
deletion by pressing
OK again.
• Copy to SD card

Fig. 241
Allows to copy data from Bravo 400S internal memory onto a SD card.
- Select the item
Copy to SD card (Fig. 241) and press OK .
ERROR MESSAGES
A file with the same name already exists on the SD card. You can do the
following:
- Press
OK to replace the file.
WARNING: ALL data in the replaced file will be lost.
- Press
ESC to avoid replacing the file; check its contents or edit its name
before trying to save again.
SC card copy error!
- There is no more space available on the SD card:
delete a few files from the memory and try saving again
(par.13.4.2 -
SD card > Implements > Delete ).
- The SD card is locked.
Remove the protection and try saving again.
• Copy to USB Pendrive (1 or 2)

Fig. 242
Allows to copy data from Bravo 400S internal memory onto a pendrive.
- Select the item
Copy to USB Pendrive (Fig. 242) and press OK .
ERROR MESSAGES
A file with the same name already exists on the pendrive. You can do the
following:
- Press
OK to replace the file.
WARNING: ALL data in the replaced file will be lost.
- Press
ESC to avoid replacing the file; check its contents or edit its name
before trying to save again.
USB pendrive copy
error!
- There is no more space available on the pendrive
delete a few files from the memory and try saving again
(par.13.4.3 -
USB Pendrive > Implements > Delete ).
- The pendrive is locked.
Remove the protection and try saving again.
"HOME" MENU - F4 MEMORIES MANAGEMENT > INTERNAL MEMORY
Par.
7.4
Exits the function
or data change Confirm access
or data change
Scroll
(LEFT /
RIGHT) Delete
selected
character Increase /
Decrease
of data Scroll
(UP /
DOWN) Enter
selected
character