ARM Electronics XR&HD480 OSD - Manual (Page 16)

User’s Manual
15
„ Daylight Saving Time
Setup
This menu is for people who live in certain regions to observe Daylight Saving
Time (DST).
- Daylight Saving Time
Select <On> to enable, or <Off> to disable the function.
If the function is disabled, the DST Start/ End time and DST Bias will be
grayed out and cannot be accessed. If this function is enabled, the
date/time information will be shown on the screen with a DST icon
when playing back recorded video or searching video in the event list.
“S” indicates summer time and “W” indicates wintertime.
- DST Start / End
These items are used to set the daylight saving duration. Use LEFT /
RIGHT to move the cursor to the next or previous field, UP / DOWN to
change the settings.
- DST Bias
This item allows the user to set the amount of time to move forward
from the standard time for daylight saving time. Available options are
<30>, <60>, <90> and <120> minutes.
„ Network Time Protocol Setup
After entering the time zone, the <Network Time Protocol Setup> option will
appear. Select the <Network Time Protocol Setup> to set the time server.
The default time server is time.nist.gov, but the user can change it to other
time servers when desired. A list of IP addresses of the time servers is listed
below.
129.6.15.28 129.6.15.29 132.163.4.101
132.163.4.102 132.163.4.103 128.138.140.44
192.43.244.18 131.107.1.10 69.25.96.13
206.246.118.250 208.184.49.9 64.125.78.85
207.200.81.113 64.236.96.53 68.216.79.113
After the time server is set, set <Manually Time Sync> to <Yes> to sync the
time immediately. The time sync can also be updated periodically. Set
<Automatically Time Sync> to <On> and the time will be automatically
synced once an hour.