ARM Electronics XR&HD480 OSD - Manual (Page 91)

User’s Manual
90
Appendix B: Dial-up Connections via Modem
A dial-up modem connection allows users to monitor via the remote software and receive
alarm notice without an internet connection. Following are the steps for establishing the
connection between a Premium H.264 DVR and a PC.
Establishing Dial-in Connection
The Dial-in function enables users to establish dial-up modem communication to and from
the Premium H.264 DVR for monitoring via the remote software. Follow the description
below to set up the DVR and PC.
DVR Configuration:
• Connect an USB modem to the USB socket and connect a working phone line to the
modem.
• Press MENU and input correct username and password to access the OSD setup menu.
Select <Network Setup> Æ <Modem Setup> Æ <Dial-in Setup> to set up the Dial-In
settings, including Dial-in Account and password, etc.
• For more information on dial-in settings, see Section Dial-in Setup.
PC Configuration:
• Click <Start>, <My Network Places>, <View Network Connections> and then select
<Create New Connection>. The New Connection Wizard is displayed. Click <Next> to
continue.