ARM Electronics XR&HD480 OSD - Manual (Page 70)

User’s Manual
69
< Per Channel Config >
This menu is used to configure the event related settings for each channel. The menu is
displayed as below.
Per Channel Config
Channel Select
Video Loss Detect
Motion Detect
Detection Config
Alarm In
Alarm Out
Event Trigger Preset
Copy Event Settings CH01
On
On
OFF
None
OFF
„ Channel Select
The item is used to select a desired channel for setting the parameters. Move
the cursor to <Channel Select> and press ENTER, then select a channel
using UP / DOWN keys. Press ENTER again to confirm the setting.
„ Video Loss Detect
This item allows users to enable / disable Video Loss acknowledged as an
alarm event. Select <On> to enable Video Loss acknowledged as alarm
events, <Off> to disable.
„ Motion Detect
Use to enable or disable the motion detection function of the Premium H.264
DVR
. If motion detection function is enabled, it is required to define the motion
detection parameters such as detection area and sensitivity settings.
„ Detection Config
If motion detection function is enabled, it is required to define the motion
detection parameters such as detection area and sensitivity settings. Select a
channel for setting the parameters, move the cursor to <Detection Config>
and press ENTER. The Detection Configuration menu displays as follows.
Detection Config
Detected Area Setup
Sensitivity
Area Threshold
88%
6%
40%
▲