ARM Electronics XR&HD480 OSD - Manual (Page 77)

User’s Manual
76
< Export Configuration >
Users are allowed to save the DVR configuration by exporting it to an external drive, such
as a USB Flash Drive. Before exporting the configuration, make sure the device in which
the configuration will be saved is connected to the unit appropriately. Select <Export
Config> from the Configuration menu and press ENTER. The following menu is displayed.
Items in this menu are described in the following sections.
Export Config
Copy Destination
Config Name
Begin Export
No
„ Copy Destination
Select this item to list available destinations (external memory devices) to
which the configuration can be exported. Press UP / DOWN to choose a
destination. Please note that saving a different configuration to the same copy
destination with the same file name will overwrite the previous configuration
file without warning.
NOTE: Users are not allowed to select any DVD+RW as a copy
destination, including built-in DVD+RW.
„ Configuration Name
This item allows users to assign a name to the exported configuration file.
Use the virtual keyboard to enter the configuration file name. Note that the file
name can contain up to 15 characters, with no spaces.
„ Begin Export
Select <Yes> to begin exporting the configuration file, or <No> to abort the
export.
NOTE:
We strongly recommend users to export configuration before
upgrading the system, and back it up routinely, just in case for
unexpected situation.