ARM Electronics XR&HD480 OSD - Manual (Page 83)

User’s Manual
82
POS Setup
The <POS Setup> function provides a connection between a DVR and a Point-of-Sale
equipment, such as cash registers. With this function, the financial transaction data can be
linked to specific camera images and recorded to the DVR. To enable this function, enter
OSD setup menu and select <POS Setup>. Press Enter and the menu will be shown as
follows. Items in this menu are described in the following subsections.
POS Setup
POS Function
POS Overlay
Exception POS Setup
Input Setup On
Live&PB
< POS Function >
This item is used to enable/disable this function. Select <On>, the text database will be
created on the hard disk.
< POS Overlay >
This item is for users to choose which mode users want to display the POS overlay on the
monitor. Select <Live> to display the POS overlay in Live mode only; select <PB> to display
the POS overlay in Playback mode only; and select <Live&PB> to display in both modes.
NOTE: POS overlay only shows in full screen mode.
NOTE:
PB overlay is available only under x1 playback speed.
< Exception POS Setup >
This sub-menu is used to define the conditions that will be treated as an “Exception” and
thus trigger an action (the function will be implemented later).
Exception POS Setup
Exception No.
Trigger
Exception String
By Numerals
Value
Value (Upper Limit)
1
On
NO SALE
OFF