ARM Electronics XR&HD480 OSD - Manual (Page 58)

User’s Manual
57
„ Day / Night Time Start/ End
The Day/Night Start Time and End Time determines the duration of day/night
recording time. Time is indicated in 1-minute increments. The time display
format in this menu is based on the setting of <Time Display Mode> in
<System Setup>.
„ Weekend Schedule
The Weekend Schedule determines whether a weekend schedule is in effect.
Choose <On> to take effect the related weekend settings.
„ Weekend Start / End
The Weekend Start Time indicates the specific day and time that a weekend
begins, for example, Fri 18:00. The Weekend End Time indicates the specific
time and day that a weekend ends, for example, Mon 06:00. Time is indicated
in 1-minute increments.
Note that the value users have set indicates when the regular Day and Night
scheduling ends, and Weekend recording begins.
< Preset Record Configuration >
The <Preset Config> is used to select the preset recording quality and frame rate. Different
preset recording quality levels are offered for users to choose: <Best Quality>, <Standard>,
<Extended Record>, <Event Only>, <ezRecord>, and <OFF>. The default setting is <Best
Quality>. According to various Record modes, the preset configuration options for normal
and event status are described in terms of relative recording rate (PPS) and recording size
for each channel in the table below. The preset conditions override any other quality and
rate settings.
Record Mode: Full-D1 mode (NTSC: 720×480@120PPS) (PAL: 720×576@100PPS)
Preset Config. Normal PPS Normal Quality Event Max PPS Event Quality Event Active
Best Quality
7.5 NTSC
(6.25 PAL)
22 KB
30 NTSC
(15 PAL)
22 KB
Both
(Alarm+Motion)
Standard
7.5 NTSC
(6.25 PAL)
14 KB
30 NTSC
(15 PAL)
22 KB Both
Extended
Record
7.5 NTSC
(6.25 PAL)
6 KB
30 NTSC
(15 PAL)
22 KB Both
Event Only
0 NTSC
( 0 PAL)
NA
30 NTSC
(25 PAL)
22 KB Both
ezRecord
Auto Auto
30 NTSC
(25 PAL)
22 KB Both