ARM Electronics XR&HD480 OSD - Manual (Page 19)

User’s Manual
18
„ Load Default Setting
This item is for restoring the default settings. Select <Yes> to load default
setting or select <No> to exit.
< Network Setup >
The Network Setup menu allows users to setup the network by specifying the network
related settings, such as IP address, Netmask, etc. Check with the network administrator
and/or network service provider for specific information. The menu is as the following.
Network Setup
LAN Select
LAN Setup
Wireless Network Setup
Modem Setup
Trigger Port
Email Address
SMTP Setup
DDNS Setup
UPnP Setup LAN
80
Items in this menu are described in the following sections.
„ LAN Select
This item allows users to select the service type among <LAN>, <PPPoE>,
<WLAN>, and <None>. If users are using a wired or wireless local area
network communication, please select <LAN> or <WLAN>. If users are using
a broadband medium, such as DSL Line or cable modem, please select
<PPPoE>.
PPPoE stands for Point-to-Point Protocol over Ethernet. It is a specification
for connecting the users on an Ethernet to the Internet through a common
broadband medium.
If <None> is selected, then there is no need to set further LAN/ PPPoE/
WLAN settings. Therefore, the second item <LAN Setup> and third item
<Wireless Network Setup> will be inaccessible.