ARM Electronics XR&HD480 OSD - Manual (Page 52)

User’s Manual
51
- Advance Streaming Option
Select <Off> and the Streaming Port and Streaming Protocol will be set
automatically according to the camera model selected. Alternatively,
select <On> to manually set the Streaming Port and Streaming
Protocol.
- Streaming Port
Streaming port is used for transmitting video and related commands.
- Streaming Protocol
Enter this item to choose the streaming protocol of the IP camera
model. The DVR supports the following streaming protocols,
<RTP+RTSP>, <RTP/RTSP>, <RTP/RTSP/HTTP>, and <HTTP>.
NOTE:
Please contact the manufacturer of the IP camera for
assistance if users cannot find the information of the
Management Port/Streaming Port/ Streaming format/ Streaming
Protocol for the IP camera.
- IP Dome Protocol
If the connected device is an IP Dome Camera, then select an
appropriate IP Dome Protocol from the provided options.
„ Device Setup
Enter this item to set the basic settings of the IP camera. Upon entering this
item, the following message will be displayed.
Collecting data
Please wait!
If the connection cannot be detected, the following message will be displayed.
Please check the <Hostname/IP>, <Model>, and <Connection Setup> again
to make sure the settings are correct.
Cannot get config from the IP device