ARM Electronics XR&HD480 OSD - Manual (Page 69)

User’s Manual
68
„ Alert Notification
4 options are included in this item; <OFF>, <Event>, <Alive>, and <Both>.
<OFF>: The Alert Notification is turned off.
<Event>: When the alarm is triggered, the DVR will send an alert message to
the CMS.
<Alive>: The DVR will send an alive message to the CMS every N second
just to show users that the connection between the DVR and CMS
is in effect. The time interval N can be adjusted in <Alive Interval>.
<Both>: This enables the DVR to send both Event and Alive alert messages
to the CMS.
„ Alert IP
The Alert IP must match the IP address of the computer.
„ Alert Port
The ports for DVR and the CMS Alert MUST be the same.
„ Alive Interval
Users can define the time interval (1 to 255 seconds) between each alive
message. This item will not be accessible if the alert notification menu is set
to <OFF> or <Event>.
< Event Full Screen >
This function allows the unit to display the alarm channel in full screen size when an alarm
is triggered.
Select <None> to disable this function; select <Main> to display the alarm channel on Main
Monitor when an alarm is triggered; select <Call> to display the alarm channel on Call
Monitor; and select <Both> to display the alarm channel on both Main Monitor and Call
Monitor.
< Event Duration >
This item determines the duration of the buzzer and Alarm Out relay function once an alarm
is triggered. The available event duration range is from 5 seconds to 999 seconds.