ARM Electronics XR&HD480 OSD - Manual (Page 51)

User’s Manual
50
„ Connection Setup
This item is used to setup the connection of the IP camera. Enter this item
and the following menu will be displayed.
Connection Setup
Account
Password
Management Port
Streaming Format
I-frame Only Mode
Advanced Streaming Option
Streaming Port
Streaming Protocol
IP Dome Protocol ****
****
80
MJPEG
Off
Off
8090
RTP+RTSP
None
- Account
To be entered with the account name of the IP camera.
- Password
To be entered with the password of the IP Camera.
- Management Port
The management port is the default port of the IP camera. Different IP
cameras may have different management ports.
- Streaming Format
Access this item to select the streaming format, <MPEG4>, <MJPEG>
or <H264>, of the IP camera. Note that the streaming format for ONVIF
devices will be automatically selected by the DVR, with the priority as
H.264 > MJPEG > MPEG4.
- I-frame Only Mode
Users can select <On> for this item to limit the Live display to 1PPS to
avoid DVR overloading when the IP camera sends excessive data.
The recorded video will not be affected. This item will be accessible
only when the streaming format is set to <MPEG4> or <H.264>.
NOTE:
The DVR will automatically switch to I-frame mode when
excessive data is received.