ARM Electronics XR&HD480 OSD - Manual (Page 67)

User’s Manual
66
< Email Attachment >
The function allows the unit to send out brief AVI video regarding the event. The number of
the attached AVI video will be equivalent to the number of cameras connected to the unit.
For example, if the unit has been connected with 8 cameras, then 8 videos will be attached
to the notice email. The total size of the video will be about 2 MB.
Select <On> to enable this function; and <Off> to disable it.
NOTE: The video clips of the Email Attachment will ONLY be in *.avi format. Please
download the Divx Player from www.divx.com to play the *.avi files.
< SMS Setup >
SMS is the acronym for Short Message Service. SMS messages are short text messages
that are sent directly to a mobile phone. They are also known as text messages. This
function allows users to send an SMS message to any mobile phone on a GSM network.
To perform this function, users need a GSM/GPRS Modem. The following three models are
recommended: TC35i Terminal, MC35i Terminal, and TC65 Terminal.
Connect the GSM/GPRS Modem via the RS232 connector to the port that located on the
rear panel of the unit. Then enter the OSD setup menu and select <SMS Setup>. The
following menu displays.
SMS Setup
SMS Notice
PIN Authentication
PIN Code Setup
Receiver Number
Send Test Message
Port Selection Off
Off
„ SMS Notice
Select <On> to send out short message to the assigned mobile phone; or
select <Off> to disable this function.
„ PIN Authentication
If users have set PIN code to protect the mobile phone, then users have to
select <On> for this item and enter the corresponding PIN code in the next
item.