ARM Electronics XR&HD480 OSD - Manual (Page 34)

User’s Manual
33
Dial-out Max Time
The item indicates the longest duration of time that the connection via
modem remains active. The value can be set in the range of 1 min to
600 min, or <0> to keep the connection indefinitely.
Connect
When the Dial-out related settings are configured, set this item to
<Yes> to start dial-out or select <No> to disconnect.
- Dial Port Selection
The Dial Port Selection enables the user to assign the Dial-In/Out,
SMS, Text to the designated port of the DVR. For instance, when the
cable of a POS system is connected to the Serial Port of the DVR,
enter the Dial Port Selection menu and assign Text to the Serial Port.
The DVR will now be able to obtain data from the POS system.
Dial Port Selection
Serial Port
USB Port-Front
USB Port-Rear Top
USB Port-Rear Bottom Text
None
None
None
„ Trigger Port
To avoid the default service port (port 80) being jammed, the item enables
users to change port 80 to another port.
To change the trigger port, move the cursor over <Trigger Port> and press
ENTER, then adjust the setting using UP / DOWN keys.
„ Email Address
This item is used to edit the e-mail address where alarm event information will
be sent. Follow these steps to setup the e-mail address.
• Select <Email Address> from Network Setup menu and press ENTER. A
virtual keyboard displays.
• Use Direction keys to move the cursor for selecting from characters.
• Press ENTER to add the selected character to the entry field.
• When it’s done, move the cursor to <OK> and press ENTER to save the
settings and exit.