ARM Electronics XR&HD480 OSD - Manual (Page 87)

User’s Manual
86
„ Manual Filter Setup
After entering the Manual Filter Setup menu, users should key in hexadecimal
digits. The menu of the item is shown as follows.
Manual Filter Setup
Header 1
Header 2
„ Input Process
If users will be using a Pole Display from a PC based POS, select
<Canonical>. <Non-Canonical> is to be selected when using a Pole Display
from a Standalone POS.
„ Text Baud Rate
This item allows users to setup the baud rate of RS232 which connects the
POS Device and the DVR.
„ Text Bit
This item allows users to setup the bits of RS232.
„ Text Stop
This item allows users to setup the stop of RS232.
„ Text Parity
This item allows users to setup the parity of RS232.