ARM Electronics XR&HD480 OSD - Manual (Page 79)

User’s Manual
78
Video Export
The Video Export menu enables users to export recorded video with or without digital
signature to a USB ThumbDrive
® , or to a DVD+RW. Make sure an external storage device
is available and connected to the appropriate port for video export.
If the <Pre-Alarm Recording> function is enabled, the event video will be exported into two
files, including the pre-alarm video and the video recorded after the alarm is triggered.
When the recorded video is exported with digital signature, the output will be four files,
including *.gpg, *.avi (*.drv), *.sig and readme.txt. Exporting a video whose size is 1GB with
digital signature may take about 30 minutes.
From the Main menu, select <Video Export> and press ENTER. The following menu is
displayed. Items in the menu will be described in the following section
NOTE: The inserted DVD+RW will be ejected when its capacity is 99% full.
Video Export
Select Device
Select Ch:
From
To
Select Events
Data Type
Export Format
Digital Signature
Erase Disc
Begin Export
Ch1 Ch2 Ch3 Ch4 Ch5 Ch6
2010/12/19 AM 07:50:05
2010/12/28 PM 03:09:18
Normal
DRV
No
No
No
NOTE: The system log will keep records of all video exportations, including duration,
start time, and end time.
< Select Device >
The available external devices for exporting video will be listed by name and free size in
Select Device menu. The Select Device menu displays as follows.
Select Device
Device Name
xxx-xxx-x-x-xx
xx-xxx-xx-xxxx Available
256 MB
1.5 GB
Sel
No
No