Rmon configuration examples, Ethernet statistics group configuration example, Network requirements – H3C Technologies H3C SR8800 User Manual
Page 124: Configuration procedure
112
Task Command
Remarks
Display RMON statistics.
display rmon statistics [ interface-type
interface-number ] [ | { begin | exclude |
include } regular-expression ]
Available in any view
Display RMON history control
entry and history sampling
information.
display rmon history [ interface-type
interface-number ] [ | { begin | exclude |
include } regular-expression ]
Available in any view
Display RMON alarm
configuration information.
display rmon alarm [ entry-number ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view
Display RMON prialarm
configuration information.
display rmon prialarm [ entry-number ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view
Display RMON events
configuration information.
display rmon event [ entry-number ] [ | { begin
| exclude | include } regular-expression ]
Available in any view
Display log information for the
specified or all event entries.
display rmon eventlog [ event-number ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view
RMON configuration examples
Ethernet statistics group configuration example
Network requirements
As shown in
, Agent is connected to a configuration terminal through its console port and to
Server through Ethernet cables.
Gather performance statistics on received packets on GigabitEthernet 3/1/1 through RMON Ethernet
statistics table, and thus the administrator can view the statistics on packets received on the interface at
any time.
Figure 41 Network diagram
Configuration procedure
# Configure RMON to gather statistics for interface GigabitEthernet 3/1/1.
<Sysname> system-view
[Sysname] interface GigabitEthernet 3/1/1
[Sysname-GigabitEthernet3/1/1] rmon statistics 1 owner user1-rmon