H3C Technologies H3C SR8800 - Manual (Page 190)

178
Outputting system information to the console
Outputting system information to the console
Step Command Remarks
1. Enter system view. system-view N/A
2. Enable information
center.
info-center enable
Optional.
Enabled by default.
3. Name the channel with a
specified channel
number.
info-center channel channel-number
name channel-name
Optional.
See
Table 7 for default channel
names.
4. Configure the channel
through which system
information can be output
to the console.
info-center console channel
{ channel-number | channel-name }
Optional.
By default, system information is
output to the console through
channel 0 (known as console).
5. Configure the output rules
of system information.
info-center source { module-name |
default } channel { channel-number |
channel-name } [ debug { level severity |
state state } * | log { level severity | state
state } * | trap { level severity | state
state } * ] *
Optional.
See “
Default output rules of system
information .”
6. Configure the format of
the time stamp.
info-center timestamp { debugging | log
| trap } { boot | date | none }
Optional.
The time stamp format for log,
trap and debugging information
is date by default.
Enabling the display of system information on the console
After setting to output system information to the console, you need to enable the associated display
function to display the output information on the console.
Follow these steps in user view to enable the display of system information on the console:
Step Command Remarks
1. Enable the monitoring of
system information on the
console.
terminal monitor
Optional.
Enabled on the console and disabled on
the monitor terminal by default.
2. Enable the display of
debugging information on the
console.
terminal debugging Disabled by default.
3. Enable the display of log
information on the console.
terminal logging
Optional.
Enabled by default.
4. Enable the display of trap
information on the console.
terminal trapping
Optional
Enabled by default.