Troubleshooting flow logging, Symptom 1: no flow logs are exported – H3C Technologies H3C SR8800 User Manual
Page 208
Advertising
196
No userlog export is enabled
flow:
Export Version 3 logs to log server : enabled
Source address of exported logs : 2.2.2.2
Address of log server : 1.2.3.6 (port: 2000)
total Logs/UDP packets exported : 128/91
Logs in buffer : 10
Troubleshooting flow logging
Symptom 1: No flow logs are exported
•
Analysis: Neither of the export approach is specified.
•
Solution: Configure to export the flow logs to the information center or to the log server.
Symptom 2: Flow logs cannot be exported to log server
•
Analysis: Both of the export approaches are configured.
•
Solution: Restore to the default, and then configure the IP address and UDP port number of the log
server.
Advertising
This manual is related to the following products: