H3C Technologies H3C SR8800 - Manual (Page 189)

177
digest
The digest field is a string of up to 32 characters, outlining the system information.
For system information destined to the log host:
• If the character string ends with (l), the information is log information
• If the character string ends with (t), the information is trap information
• If the character string ends with (d), the information is debugging information
For system information destined to other destinations:
• If the timestamp starts with a percent sign (%), the information is log information
• If the timestamp starts with a pound sign (#), the information is trap information
• If the timestamp starts with an asterisk (*), the information is debugging information
serial number
This field indicates the serial number of the device that generates the system information. It is displayed
only when the system information is sent to a log host in the format of UNICOM.
source
This field indicates the source of the information, such as the slot number of a board or the source IP
address of the log sender. This field is optional and is displayed only when the system information is sent
to a log host in the format of H3C.
content
This field provides the content of the system information.
Configuring information center
Information center configuration task list
Complete the following tasks to configure information center:
Task Remarks
Outputting system information to the console Optional
Outputting system information to a monitor terminal Optional
Outputting system information to a log host Optional
Outputting system information to the trap buffer Optional
Outputting system information to the log buffer Optional
Outputting system information to the SNMP module Optional
Outputting system information to the web interface Optional
Saving system information to a log file Optional
Configuring synchronous information output Optional
Disabling a port from generating link up/down logging information Optional