Configuring ipv6 netstream, Configuring qos-based ipv6 netstream, Configuring ipv6 netstream on an spc card – H3C Technologies H3C SR8800 User Manual
Page 169
157
Configuring IPv6 NetStream
Configuring QoS-based IPv6 NetStream
NOTE:
NetStream-capable cards include NAM cards, SPC cards, and SPE cards. A QoS policy cannot be
applied to the outgoing traffic of interfaces on SPC cards. For information about configuring NetStream
on an SPC card, see “
Configuring IPv6 NetStream on an SPC card
Before configuring IPv6 NetStream, configure QoS first to identify the traffic matching the classification
criteria and configure a traffic behavior with the action of mirroring the identified traffic to a NetStream
interface of a NetStream-capable card (SPC card, SPE card, or NAM card). For more information about
class, traffic behavior, and QoS policy, see ACL and QoS Configuration Guide.
To configure QoS-based IPv6 NetStream:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enable IPv6 NetStream.
ipv6 netstream
By default, IPv6 NetStream is
disabled.
3.
Define a class and enter its
view.
traffic classifier classifier-name
[ operator { and | or } ]
N/A
4.
Define a match criterion.
if-match match-criteria
N/A
5.
Return to system view.
quit
N/A
6.
Create a traffic behavior and
enter traffic behavior view.
traffic behavior behavior-name
N/A
7.
Configure the action of
mirroring traffic to the
NetStream interface.
mirror-to interface Net-Stream
interface-number
By default, no action of traffic
mirroring is configured.
8.
Return to system view.
quit
N/A
9.
Create a policy and enter its
view.
qos policy policy-name
N/A
10.
Specify a behavior for a class
in the policy.
classifier classifier-name behavior
behavior-name
N/A
11.
Return to system view.
quit
N/A
12.
Enter interface view.
interface interface-type
interface-number
N/A
13.
Apply a QoS policy.
qos apply policy policy-name
{ inbound | outbound }
N/A
Configuring IPv6 NetStream on an SPC card