H3C Technologies H3C SR8800 - Manual (Page 204)

192
Field Description
DestNatIP Destination IP address after NAT
SrcPort TCP/UDP source port number
SrcNatPort TCP/UDP source port number after NAT
DestPort TCP/UDP destination port number
DestNatPort TCP/UDP destination port number after NAT
StartTime Start time of a flow, in seconds, counted from 1970/01/01 00:00
EndTime End time of a flow, in seconds, counted from 1970/01/01 00:00
InTotalPkg Number of packets received
InTotalByte Number of bytes received
OutTotalPkg Number of packets sent
OutTotalByte Number of the bytes sent
Reserved1
Reserved in version 0x02 (FirewallV200R001);
In version 0x03 (FirewallV200R005), the first byte is the source VPN ID, the second byte
is the destination VPN ID, and the third and forth bytes are reserved
Reserved2 For future applications
Reserved3 For future applications
Flow logging configuration task list
Complete the following tasks to configure flow logging:
Task Remarks
Configuring flow logging version Optional
Configuring the source address for flow logging packets Optional
Exporting flow logs
Exporting flow logs to log server Required
Use either approach
Exporting flow logs to information center
Configuring flow logging version
Configure the flow logging version according to the receiver capability. A receiver cannot resolve flow
logs correctly if it does not support the flow logging version.
To configure flow logging version:
Step Command Remarks
1. Enter system view. system-view N/A
2. Configure flow logging
version. userlog flow export version
version-number
Optional
The default flow logging version is 1.0