H3C Technologies H3C SR8800 - Manual (Page 125)

113
After the above configuration, the system gathers statistics on packets received on GigabitEthernet
3/1/1.
To view the statistics of the interface:
# Execute the display command.
<Sysname> display rmon statistics GigabitEthernet 3/1/1
EtherStatsEntry 1 owned by user1-rmon is VALID.
Interface : GigabitEthernet3/1/1<ifIndex.3>
etherStatsOctets : 21657 , etherStatsPkts : 307
etherStatsBroadcastPkts : 56 , etherStatsMulticastPkts : 34
etherStatsUndersizePkts : 0 , etherStatsOversizePkts : 0
etherStatsFragments : 0 , etherStatsJabbers : 0
etherStatsCRCAlignErrors : 0 , etherStatsCollisions : 0
etherStatsDropEvents (insufficient resources): 0
Packets received according to length:
64 : 235 , 65-127 : 67 , 128-255 : 4
256-511: 1 , 512-1023: 0 , 1024-1518: 0
# Obtain the value of the MIB node directly by executing the SNMP Get operation on the NMS through
software. (Details not shown)
History group configuration example
Network requirements
As shown in Figure 42 , Agent is connected to a configuration terminal through its console port and to
Server through Ethernet cables.
Gather statistics on received packets on GigabitEthernet 3/1/1 every one minute through RMON
history statistics table, and thus the administrator can view whether data burst happens on the interface
in a short time.
Figure 42 Network diagram
Configuration procedure
# Configure RMON to periodically gather statistics for interface GigabitEthernet 3/1/1.
<Sysname> system-view
[Sysname] interface GigabitEthernet 3/1/1
[Sysname-GigabitEthernet3/1/1] rmon history 1 buckets 8 interval 60 owner user1
After the above configuration, the system periodically gathers statistics on packets received on
GigabitEthernet 3/1/1: the statistical interval is 1 minute, and statistics of the last 8 times are saved in
the history statistics table.