Configuring ftp tests, Configuration prerequisites – H3C Technologies H3C SR8800 User Manual
Page 28
16
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter NQA test group view.
nqa entry admin-name operation-tag N/A
3.
Configure the test type as
DNS and enter test type view. type dns
N/A
4.
Specify the IP address of the
DNS server as the
destination address of DNS
packets.
destination ip ip-address
By default, no destination IP
address is configured.
5.
Configure the domain name
that needs to be translated.
resolve-target domain-name
By default, no domain name is
configured.
6.
Configure optional
parameters.
parameters for an NQA test group
”
Optional.
NOTE:
A DNS test simulates the domain name resolution. It does not save the mapping between the domain name
and the IP address.
Configuring FTP tests
FTP tests of an NQA test group are used to test the connection between the NQA client and an FTP server
and the time necessary for the FTP client to transfer a file to or download a file from the FTP server.
Configuration prerequisites
Before you start FTP tests, configure the FTP server. For example, configure the username and password
that are used to log in to the FTP server. For more information about FTP server configuration, see
Fundamentals Configuration Guide.
Configuring FTP tests
To configure FTP tests:
Step Command
Remarks
1.
Enter system view.
system-view N/A
2.
Enter NQA test group view.
nqa entry admin-name
operation-tag
N/A
3.
Configure the test type as FTP
and enter test type view.
type ftp N/A
4.
Specify the IP address of the
FTP server as the destination
address of FTP request
packets.
destination ip ip-address
By default, no destination IP
address is configured.