Epson L1455 - Manual (Page 109)

3. Specify the recipient.
❏ To enter manually: Enter numbers using the numerical keypad on the control panel or the LCD screen, and
then press the enter key at the bottom-right of the screen.
❏ To select from the contacts list: Press Contacts, press the check box to add a check mark to a contact, and
then press Proceed.
❏ To select from the sent fax history: Press History, select a recipient, and then press Menu > Send to this
number .
Note:
❏ You can send the same monochrome fax to up to 200 recipients. A color fax can only be sent to one recipient at a
time.
❏ To add a pause (pause for three seconds) during dialing, enter a hyphen by pressing
.
❏ When Direct Dialing Restrictions in Security Settings is enabled, you can only select fax recipients from the
contacts list or the sent fax history. You cannot manually enter a fax number.
❏ If you set an external access code in Line Type, enter "#" (hash) instead of the actual external access code at the
beginning of the fax number.
❏ To delete recipients you entered, display the list of recipients by pressing the field on the screen that shows a fax
number or the number of recipients, select the recipient from the list, and then select Delete from the List.
4. Press Menu, select Fax Send Settings, and then make settings such as the resolution and the sending method
as necessary.
Note:
❏ To send 2-sided originals, enable ADF 2-Sided. However, you cannot send in color with this setting.
❏ Press Preset on the fax top screen to save the current settings and the recipients in Preset. Recipients may not be
saved depending on how you specified the recipients, such as entering a fax number manually.
5. When sending a monochrome fax, press Preview on the fax top screen to check the scanned document.
❏
: Moves the screen in the direction of the arrows.
❏
: Reduces or enlarges.
❏
: Moves to the previous or the next page.
❏ Retry: Cancels the preview.
❏ View: Displays or hides the operation icons.
Note:
❏ You cannot send the fax in color after previewing.
❏ When Direct Send is enabled, you cannot preview.
❏ When the preview screen is left untouched for 20 seconds, the fax is sent automatically.
❏ The image quality of a sent fax may be different from what you previewed depending on the capability of the
recipient machine.
6. Press the x button.
Note:
❏ To cancel sending, press the
y button.
❏ It takes longer to send a fax in color because the printer performs scanning and sending simultaneously. While the
printer is sending a color fax, you cannot use the other features.
User's Guide
Faxing
109