Email server setting items – Epson L1455 User Manual
Page 226
4.
Select the authentication method of the email server you are using.
c
Important:
The following authentication methods are available. SSL and STARTTLS are not supported.
❏ None
❏ SMTP (SMTP AUTH)
❏ POP Before SMTP
Contact your internet service provider to confirm the authentication method of the email server.
The printer may not be able to communicate with an email server even if the authentication method is
available since security may be enhanced (for example SSL communication is necessary). Visit the Epson
support website for the latest information.
(Europe)
(outside Europe)
5.
Make the appropriate settings.
The necessary settings vary depending on the authentication method. Enter the information for the email
server you are using.
6.
Press OK.
Note:
❏ If an error message is displayed, check if the email server settings are correct.
❏ When you cannot send an email even if you have completed the settings, check the authentication method for the
email server you are using.
Related Information
&
“Email Server Setting Items” on page 226
Email Server Setting Items
Items
Explanations
Authentication Method
Displays the selected authentication method.
Authenticated Account
If you select SMTP-AUTH or POP before SMTP as the Au-
thentication Method, enter the user name (email address)
registered to the email server within 30 characters or less.
Authenticated Password
If you select SMTP-AUTH or POP before SMTP as the Au-
thentication Method, enter the password of the authenti-
cated account within 20 characters or less.
Sender's Email Address
Specify the email address that the printer uses to send
emails. You can specify the existing email address. To make it
clear that the email is being sent from the printer, you can
acquire an address specifically for the printer and enter it
here.
SMTP Server Address
Enter the server address of the server that sends the email
(SMTP server).
User's Guide
Appendix
226