RISCO Group Gardtec GT600 - Manual (Page 115)

GT 600 / 601 Connection Details
If powering up the Control Panel with battery only, connect battery and short out JP1
for approx. 5 seconds. Keypad and Control Panel will then become active.
Fig 15
Page 113
GT 600 / 601 Engineer’s Reference Guide
On the GT 600 the
BAT. jumper can be
found under the pcb
plastic cover.
Panel Tamper (601 ONLY)
Connect flying lead from Tamper
Switch to JP2.
Use Cable
1CB 6046
Use Cable
1CB 6047
Use Cable 1CB 6048